Manufacturing FFKM, FKM AED LT, FEPM, HNBR AED LT, Precision Machinery Metal Plastics and Rubber
- +971 50 555 6196
Menu
Hose Clamp
Hose Clamp
A hose clamp or hose clip is a device used to attach and seal a hose onto a fitting such as a barb or nipple. Screw/band hose clamps.
- Perforated worm gear clamps
- Embossed worm gear clamps
- Constant tension clamps
- Heavy duty clamps
- T-bolt clamps
Thrust bearings are of different varieties. Ball thrust bearings are composed of ball bearings supported in a ring. They are used in low thrust applications where the radial load is very small. Thrust roller bearings are made of small tapered rollers arranged so that their axes converge at a point on the axis of the bearing.
Perforated Worm Gear Clamps
Zinc plated steel screw
- Used for small diameter applications in mildly corrosive environments
- Lightweight with a streamlined configuration, which allows for installation in tight fitting or difficult to reach areas
- Higher sealing pressure with minimal torque
- Per SAE standard J1508 Type “M”
- 5/16″ (7.9 mm) band width
- 301 Stainless Steel band and housing
- Zinc Plated Steel slotted hex-head screw
410 Ss Screw
- Used for small diameter applications in mildly corrosive environments
- Lightweight with a streamlined configuration, which allows for installation in tight fitting or difficult to reach areas
- Higher sealing pressure with minimal torque
- Per SAE standard J1508 Type “M”
- 5/16″ (7.9 mm) band width
- 301 Stainless Steel band and housing
- 410 Stainless Steel slotted hex-head screw
350 Ss Screw
- Used for small diameter applications in mildly corrosive environments
- Lightweight with a streamlined configuration, which allows for installation in tight fitting or difficult to reach areas
- Higher sealing pressure with minimal torque
- Per SAE standard J1508 Type “M”
- 5/16″ (7.9 mm) band width
- 301 Stainless Steel band and housing
- 305 Stainless Steel slotted hex-head screw
316 Ss Screw
- Used for small diameter applications in corrosive environments
- Lightweight with a streamlined configuration, which allows for installation in tight fitting or difficult to reach areas
- Higher sealing pressure with minimal torque
- Per SAE standard J1508 Type “M”
- 5/16″ (7.9 mm) band width
- 316 Stainless Steel band and housing
- 316 Stainless Steel slotted hex-head screw
Jet Quick Connect 9/16 Band 301 Ss Screw
- Used in aircraft and heavy duty, industrial applications that are non-corrosive
- Permit fast and easy installation, yet can never snap open once installed
- Four piece Quadra-Lock construction: housing orbitally riveted to saddle at 4 points providing extra strength
- 9/16″ (14.2 mm) band width
- 5/16″ (7.9mm) hex head screw
- 301 Stainless Steel band and housing
- 301 Stainless Steel slotted hex-head (H) Screw
Embossed Worm Gear Clamps
ABA Mini (S10)
- Used for small, thin walled hoses
- Rolled-up band edges and a smooth band underside protects hoses
- Aluzinc gives three times the protection against corrosion than galvanized steel
- Profiled band tongue for added strength
- The nut is secured into the band to prevent loss even if the screw is removed
- 9 mm (23/64″) band width
- Aluzinc band and nut
- Aluzinc slotted hex-head screw
ABA Original (S20)
- Used for soft hose applications in non corrosive environments
- Rolled-up band edges and a smooth band underside protects soft hoses
- S20 (Aluzinc) gives three times the protection against corrosion than uncoated galvanized steel
- High sealing pressure and high torque tolerance
- Per SAE standard J1508 Type “FE”
- One-piece, pressed housing
- 12 mm (15/32″) band width
- 7 mm slotted hex-head screw
- S20 (Aluzinc) band
- S20 (Aluzinc) housing – painted blue
- S20 (Aluzinc) screw
ABA Original (S40)
- Used for soft hose applications and damp environments
- Rolled-up band edges and a smooth band underside protects softer hoses
- S40 is more durable than S20 by withstanding corrosion in some situations
- High sealing pressure and high torque tolerance
- Per SAE standard J1508 Type “FE”
- One-piece, pressed housing
- 12 mm (15/32″) band width
- 7 mm slotted heax-head screw
- S40 (W4/304 SS) band and housing
- S40 (W4/304 SS) screw
ABA Original (S50)
- Used for soft hose applications and marine or low oxygen environments
- Rolled-up band edges and a smooth band underside protects softer hoses
- S50 is more durable than S40 by withstanding corrosion in almost all situations
- High sealing pressure and high torque tolerance
- Per SAE standard J1508 Type “FE”
- One-piece, pressed housing
- 12 mm (15/32″) band width
- 7 mm slotted hex-head screw
- S50 (W5/316 SS) band and housing
- S50 (W5/316 SS) screw
Zinc Plated Steel Screw
- Used in high tensile force applications such as temperature variant hoses
- Rolled-up band edges and a smooth band underside protects hoses
- Corrugated spring for automatic self-adjusting feature
- Asymmetric extension; prevents the housing from tilting over when the clamp is tightened
- Screw support; Ease of assembly due to the safe guidance of the emerging band end
- Material and clamping range stamped on the band; prevention of errors
- Per SAE standard J1508 Type “FEO”
- Short housing saddle for level contact pressure
- 9 mm (3/8″) band width
- 430 Stainless Steel band
304 SS Screw
- Used in high tensile force applications such as temperature variant hoses
- Rolled-up band edges and a smooth band underside protects hoses
- Corrugated spring for automatic self-adjusting feature
- Asymmetric extension; prevents the housing from tilting over when the clamp is tightened
- Screw support; Ease of assembly due to the safe guidance of the emerging band end
- Material and clamping range stamped on the band; prevention of errors
- Per SAE standard J1508 Type “FEO”
- Short housing saddle for level contact pressure
- 9 mm (3/8″) band width
- 304 Stainless Steel band
- 304 Stainless Steel slotted hex-head Screw
Torro 12Mm 316 Ss Screw
- Used in high tensile force applications such as temperature variant hoses
- Rolled-up band edges and a smooth band underside protects hoses
- Asymmetric extension; prevents the housing from tilting over when the clamp is tightened
- Screw support; Ease of assembly due to the safe guidance of the emerging band end
- Material and clamping range stamped on the band; prevention of errors
- Per SAE standard J1508 Type “FEO”
- Short housing saddle for level contact pressure
- 12 mm (3/8″) band width
- 316 Stainless Steel band
- 316 Stainless Steel slotted hex-head Screw
Constant Tension Clamps
T-Bolt Small Spring Loaded Clamp
- Used for industrial, marine and vehicle applications to compensate for thermal expansion of hose or fitting connections
- B9226 – Standard duty small spring
- Floating bridge liner
- Per SAE standard J1508 Type “SLTB”
- 3/4″ (19 mm) band width
- 301 Stainless Steel Band
- Zinc Plated Steel bolt and nylon insert locknut
T-Bolt Large Spring Loaded Clamp
- Used for industrial, marine and vehicle applications to compensate for thermal expansion of hose or fitting connections
- B9224 – Heavy duty large spring
- Floating bridge liner
- Per SAE standard J1508 Type “SLTB”
- 3/4″ (19 mm) band width
- 301 Stainless Steel Band
- Zinc Plated Carbon Steel bolt and nylon insert locknut
Constant Torque
- Used in applications that require thermal expansion and contraction
- Aero-Seal construction for use on smaller diameters
- Liners are integral extensions of the band that lie true to the clamping axis
- Monitors and then compensates for the temperature variations by changing diameter through a unique worm-gear Belleville assembly
- Energy stored in four, compressed Belleville springs controls automatic clamp adjustment
- Per SAE standard J1508 type “SLHD”
- Four piece, Quadra-lock construction: housing orbitally riveted to saddle at 4 points providing extra strength
- 301 Stainless Steel Belleville springs (four)
- 304 Stainless Steel band and housing
- 410 Stainless Steel hex cap screw
Heavy Duty Clamps
305 Ss Screw
- Used for small diameter applications
- Heavy duty design for increased pressure sealing in tight fitting applications
- Per SAE standard J1508 Type “M”
- 5/16″ (7.9 mm) band width
- 301 Stainless Steel band and housing
- 305 Stainless Steel slotted hex-head screw
302 Ss Screw
- Used in industrial, automotive and marine applications
- High strength clamping
- Floating bridge liner
- Per SAE standard J1508 Type “TB”
- 3/4″ (19 mm) band width
- 201/301 Stainless Steel band and housing
- 302 Stainless Steel bolt and nylon insert locknut
316 Ss Screw
- Used in OEM or other production assembly applications in corrosive environments
- Eight screw threads engaged simultaneously for torquing drive, sealing pressure and vibration resistance
- Three times stronger than any other worm drive clamp
- Per SAE standard J1508 Type “HD”
- 5/8″ (15.8 mm) band width
- 316 Stainless Steel Band and housing
- 316 Stainless Steel slotted hex-head screw
Breeze Hi Torque (410 Ss)
- Used in OEM or other production assembly applications
- Single piece band is extended underneath the adjustment slots to protect silicone or other soft-surface materials
- Eight screw threads engaged simultaneously for torquing drive, sealing pressure and vibration resistance
- Three times stronger than any other worm drive clamp
- Per SAE standard J1508 Type “HD”
- 5/8″ (15.8 mm) band width
- 304 Stainless Steel Band
- 410 Stainless Steel slotted hex-head screw
Breeze V-Band (302 Ss)
- Used to secure coupling for connecting flanged joints
- Available in standard and custom diameter and V segments.
- T-Bolt design
- Bandwidth varies from clamp to clamp depending on application
- 302 Stainless Steel band
- 305 Stainless Steel bolt and locknut
T-Bolt Clamps
Breezr T-Bolt
- Used in industrial, automotive and marine applications
- High strength clamping
- Floating bridge liner
- Per SAE standard J1508 Type “TB”
- 3/4″ (19 mm) band width
- 201/302 Stainless Steel band and housing
- Zinc Plated Steel bolt and nylon insert locknut
Hose Clamp Manufacture And suppliers in Dubai, UAE
Applications
- Automotive
- Fluid Power
- Electronics
- Hydraulic Fittings
- Valves and Pumps
- Earthmoving & Construction Equipment
- Power Generation
- Instrumentation
- Filtration
- Hydraulic Cylinders
- Plumbing Products
- Petrochemicals
- Chemicals & Fertilizer Plants
- Pharmaceuticals
- Pneumatic Cylinders
- Dairy/Food Processing
Menu
