Manufacturing FFKM, FKM AED LT, FEPM, HNBR AED LT, Precision Machinery Metal Plastics and Rubber
- +971 50 555 6196
V- Belts
V- Belts
Classic Belts
Features & Benefits:
- Top width to height ratio 1.6:1
- Temperature range: -18°C to +80°C
- Maximum recommended belt speed is 30 m/sec
- Permissible flex rate f=80 per second
- Antistatic, Oil and Heat resistant
Standards, Dimensions & Product Range:
Classic Cogged V Belts
Raw Edge Belts are of three types:
1. REC Belts (Raw Edge Moulded Cogged Belts)
2. REP Belts (Raw Edge Plain Belts)
3. REL Belts (Raw Edge Laminated Belts)
Features:
Special top layer with fabric : The rigid layer on the top restricts top layer cracking and gives uniform tension on cord ends. Top fabric gives better support & protection from environment.
Tough Tensile Member for Greater Strength : Specially treated stabilized polyester cord provides high tensile strength with minimum stretch which in turn gives Wedge-belt superior resistance to fatigue & shock loads.
Moulded Cogs: Moulded cogs allow the Raw edge cogged belts to operate even over smaller diameter pulley at high speeds. The cogs also help in reducing the bending stress apart from providing the higher surface area for proper heat dissipation.
Polychloroprene Cushion Rubber Compound : Ensures the best possible bond between the base compound, the tension cord & rubber impregnated fabric top surface that provides long service without cord separation.
Fibre Filled Polychloroprene Base Compound : Gives increased power transmission capability, superior transverse stiffness & high wear resistance.
- Speed ratios up to 1:12 are possible: This eliminates the need for multi stage drives.
- Temperature range: -25°C to +100°C
- Maximum recommended belt speed is 30 m/s*
- Antistatic, Oil and Heat resistant
WEDGE COGGED BELTS
Features:
Special top layer with fabric: The rigid layer on the top restricts top layer cracking and gives uniform tension on cord ends. Top fabric gives better support & protection from environment.
Tough Tensile Member for Greater Strength: Specially treated stabilized polyester cord provides high tensile strength with minimum stretch which in turn gives Wedge-belt superior resistance to fatigue & shock loads.
Moulded Cogs: Moulded cogs allow the Raw edge cogged belts to operate even over smaller diameter pulley at high speeds. The cogs also help in reducing the bending stress apart from providing the higher surface area for proper heat dissipation.
Polychloroprene Cushion Rubber Compound: Ensures the best possible bond between the base compound, the tension cord & rubber impregnated fabric top surface that provides long service without cord separation.
Fibre Filled Polychloroprene Base Compound: Gives increased power transmission capability, superior transverse stiffness & high wear resistance.
- Speed ratios up to 1:12 are possible: This eliminates the need for multi stage drives.
- Temperature range: -25°C to +100°C
- Maximum recommended belt speed is 30 m/s*
- Antistatic, Oil and Heat resistant
Advantages:
The advantages of Raw Edge Moulded Cogged Belts over Wrap Belts are of great importance in following cases-
1. Drives with very small pulley diameters
2. High ambient temperatures
3. High belt speeds
4. High level of power transmission
APPLICATIONS
- Automotive
- Fluid Power
- Electronics
- Hydraulic Fittings
- Valves and Pumps
- Earthmoving & Construction Equipment
- Power Generation
- Instrumentation
- Filtration
- Hydraulic Cylinders
- Plumbing Products
- Petrochemicals
- Chemicals & Fertilizer Plants
- Pharmaceuticals
- Pneumatic Cylinders
- Dairy/Food Processing